White Metal Paint – Smooth Finish – Aerosol

White Metal Paint – Smooth Finish is a durable aerosol topcoat formulated for metalwork. It lays down a clean, even white film with a smooth, low-sheen appearance, ideal for refurbishing gates, railings, brackets, machinery guards and fixtures. The easy-spray format provides fast, consistent coverage on bars, edges and complex shapes for professional-looking results on site or in the workshop.

Key Features & Benefits

• Smooth White Finish: Levels to a uniform, low-sheen coat that freshens and brightens metalwork.
• Durable Protection: Tough topcoat for everyday weathering and wear when correctly applied.
• High Opacity: Strong coverage helps mask repairs and colour variation.
• Versatile Use: Suitable for ferrous metalwork and primed substrates.
• Fast Application: Aerosol reaches welds, corners and detailed sections with minimal overspray.

Product & Technical Details

• Type: Smooth-finish white aerosol metal paint
• Colour/Finish: White, smooth (low-sheen)
• Substrates: Ferrous metals; suitable primers required on bare metal and non-ferrous
• Environment: Interior & exterior when applied over appropriate primers
• Typical Uses: Gates, railings, balustrades, brackets, frames, fixtures and general metal projects

Suitable Applications

• Decorative and protective finishing of steel/iron
• Maintenance touch-ups and refurb work
• Site and workshop applications where a smooth white finish is desired

Instructions for Use

1. Prep: Remove rust/loose coatings to a sound surface; abrade, degrease and dry thoroughly.
2. Prime: Use a suitable metal primer (e.g., red oxide/grey) on bare metal; spot-test over existing coatings.
3. Shake: Agitate can for 2–3 minutes after the ball rattles.
4. Spray: Apply light, even coats from 20–30 cm, allowing brief flash-off between coats.
5. Cure: Allow to dry fully before handling or exposing to the weather; apply additional coats as needed.

Limitations & Precautions

• Apply in dry, well-ventilated conditions above 5 °C; avoid high humidity.
• Not a rust converter—remove corrosion and prime appropriately.
• Aerosol is flammable and pressurised; keep away from heat/ignition and follow all safety guidance.

White Metal Paint – Smooth Finish provides a quick, tidy route to a resilient, uniform white topcoat on metalwork—ideal for smart, long-lasting results indoors or out.