Soudal Soudafix P300-ST - Heavy Duty Polyester ResinSoudal Soudafix P300-ST

High-Performance Polyester Resin for Heavy-Duty Anchoring

Soudal Soudafix P300-ST is a two-component, styrene-free polyester resin specifically developed for strong and reliable anchoring of threaded rods, bolts, and rebar into concrete, masonry, and stone. Suitable for medium to heavy-duty fixings in both solid and hollow substrates, it provides fast curing, excellent load-bearing performance, and ease of application with standard sealant guns.

Key Features & Benefits

• High Bond Strength: Provides secure and durable anchorage for metal fixings in concrete and masonry.
• Styrene-Free Formula: Low odour and environmentally friendly for safer indoor use.
• Fast Curing: Quick setting times reduce installation delays and downtime.
• Easy Application: Compatible with standard sealant guns — no special tools required.
• Versatile Use: Suitable for solid and hollow substrates with appropriate sleeves.

Product Details

• Type: Two-component polyester resin
• Base: Styrene-free polyester
• Colour: Grey
• Packaging: 300ml cartridge (fits standard gun)
• Temperature Resistance: Up to +80°C (short term)

Application Instructions

1. Surface Prep: Clean the drill hole thoroughly using brush and air pump. Remove all dust and debris.
2. Mix & Inject: Insert cartridge into gun and attach mixing nozzle. Discard initial portion until colour is uniform, then inject into hole.
3. Insert Fixing: Push threaded rod or anchor into the filled hole with a twisting motion.
4. Allow to Cure: Let resin fully cure before applying loads (refer to label for curing times).

Limitations

• Not suitable for water-filled or frost-prone holes during curing.
• Use correct installation technique and sleeve for hollow substrates.

Health & Safety

Avoid contact with skin and eyes. Use gloves and ensure adequate ventilation during use. Refer to the Safety Data Sheet (SDS) for full health and safety instructions.