Soudal Soudabond Easy Gun GradeSoudal Soudabond Easy Gun Grade

High-Strength PU Adhesive Foam for Bonding Insulation and Panels

Soudal Soudabond Easy Gun Grade is a fast-curing, high-strength polyurethane adhesive foam designed for bonding a wide range of construction materials. Applied with a foam gun for precision and control, it replaces traditional mortars, adhesives, and mechanical fixings in many insulation and panel installation tasks. Its quick setting and excellent gap-filling properties make it ideal for professional use in both interior and exterior environments.

Key Features & Benefits

• Gun Grade Control: Use with a foam gun for precise application, minimal waste, and clean results.
• Strong Adhesion: Bonds to concrete, wood, metal, plasterboard, insulation panels (EPS, XPS, PU), and more.
• Quick Curing: Fast setting time reduces installation delays — initial tack in 5 minutes, full bond in 30 minutes.
• Gap Filling: Expands slightly to fill small surface irregularities, ensuring strong contact and load distribution.
• Weather & Moisture Resistant: Suitable for indoor and protected outdoor applications.

Product Details

• Type: Polyurethane adhesive foam
• Application: Gun-applied using standard PU foam applicator
• Colour: Light yellow
• Packaging: 750ml pressurised aerosol can
• Initial Tack: Approx. 5 minutes
• Full Bond Strength: Approx. 30 minutes (depending on conditions)

Application Instructions

1. Preparation: Shake can well and moisten substrates for better adhesion.
2. Apply Adhesive: Screw can onto foam gun and apply beads or spots depending on panel size and weight.
3. Position & Press: Press materials together within a few minutes and hold briefly to ensure good contact.
4. Finishing: Remove any excess foam before it cures. Trim after full set if needed.

Limitations

• Not suitable for continuous water immersion or UV exposure without protection.
• Always test on lightweight materials or delicate finishes before full application.

Health & Safety

Pressurised container. Use in ventilated areas. Wear gloves and eye protection. Avoid inhalation and contact with skin or eyes. Refer to SDS for full safety information.