Dustproofer Hardener - Hardening and Dustproofing Concrete Surfaces - Biokil CrownDustproofer Hardener

Biokil Crown Dustproofer Hardener

Concentrated Silicate Solution for Hardening and Dustproofing Concrete Surfaces

Biokil Crown Dustproofer Hardener is a concentrated silicate solution designed for direct application to concrete surfaces. It effectively hardens and dustproofs the surface, making it suitable for both internal and external use. The fast-acting formula leaves a residual surface to prevent further dusting and helps prevent bloom/efflorescence.

Key Features & Benefits

• Surface Hardening: Enhances the durability of concrete surfaces by hardening the top layer.
• Dustproofing: Reduces dust generation from concrete floors, improving cleanliness and safety.
• Efflorescence Prevention: Helps prevent the appearance of bloom/efflorescence on treated surfaces.
• Fast Acting: Quickly penetrates and reacts with the concrete surface for immediate results.
• Versatile Use: Suitable for new and old concrete/cement-based floors, screeds, and paving in factories, garages, and domestic dwellings.

Product Details

• Packaging: Available in 5 Litre and 25 Litre containers.
• Appearance: Clear solution.
• Specific Gravity: Approximately 1.2 g/cm³ at 20°C.
• pH: Approximately 9.
• Coverage: Approximately 5 m² per litre per coat, depending on the nature of the surface.
• Drying Time: 24 hours per coat.
• Storage: Store at moderate temperatures in original containers. Protect from frost.
• Shelf Life: Almost indefinite when stored according to manufacturer's instructions.

Application Instructions

1. Surface Preparation: Ensure the surface is clean, dry, and free from debris or growth. Repair any defects prior to application.
2. Application: Apply by brush or spray at a rate of 1 litre per 5 m². Work well into the surface.
3. Second Coat: Apply a second coat after 24 hours.
4. Final Rinse: Allow the second coat to dry for 24 hours, then hose down the entire area with cold, clean water to remove any unreacted surplus material.
5. Additional Coats: Further coats may be applied to exceptionally dusty floors.

Limitations

• Only suitable for use on cement-containing surfaces.
• Do not apply to concrete within 28 days of laying.
• Will not restore badly disintegrated concrete; carry out necessary repairs prior to use.
• Always wash down to remove unreacted material after use.

Health & Safety

Contains sodium silicate. Risk of serious damage to the eyes. Wear suitable eye/face protection and avoid contact with skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of reach of children.