Anti-Mould Paint Emulsion - Biokil CrownAnti-Mould Paint Emulsion

Durable Matt Emulsion with Long-Lasting Mould Resistance

Biokil Crown Anti-Mould Emulsion is a high-quality, water-based decorative paint formulated to provide long-lasting protection against black mould in areas subject to persistent condensation and high humidity. Ideal for use on interior walls and ceilings, especially in kitchens, bathrooms, utility rooms, and other areas prone to damp conditions. This emulsion leaves a clean, wipeable matt finish while helping maintain a hygienic environment.

Key Features & Benefits

• Mould Resistant: Contains a powerful biocide to inhibit the growth of mould and mildew on painted surfaces.
• Long-Term Protection: Up to 5 years of performance in normal domestic environments when properly applied.
• Easy to Apply: Water-based formulation suitable for brush, roller, or spray application.
• Wipeable Finish: Smooth, matt surface that resists dirt and moisture for easy cleaning.
• Decorative & Protective: Suitable for domestic, commercial, and institutional use.

Product Details

• Type: Water-based emulsion with mould inhibitor
• Finish: Matt
• Colour: White
• Coverage: Approx. 12–14m² per litre per coat (depending on surface porosity)
• Drying Time: Touch dry in 1–2 hours; recoat after 4 hours
• Application Method: Brush, roller, or spray

SKU: BIOANTIMOULDEMUL

Application Instructions

1. Preparation: Ensure surfaces are clean, dry, and free from grease, dirt, or flaking paint. Remove existing mould with Biokil Crown Biocidal Wash.
2. Application: Stir thoroughly before use. Apply two full coats for optimal protection and finish.
3. Aftercare: Maintain room ventilation and avoid excessive condensation for maximum lifespan of coating.

Limitations

• Not suitable for exterior use or surfaces subject to direct water contact (e.g., shower walls).
• Do not apply in temperatures below 8°C or during high humidity.

Health & Safety

Low VOC formulation. Avoid skin and eye contact. Use standard PPE and provide adequate ventilation during application. Refer to the Safety Data Sheet (SDS) for full safety details.