Aluminium Foil Tape - 45m x 75mmAluminium Foil Tape

Aluminium Foil Tape is a professional-grade sealing and joining tape for HVAC and insulation work where moisture resistance, thermal conductivity, flame resistance, and light/heat reflectance are important. It installs cleanly thanks to a peel-away backing paper and provides a weather-resistant seal on smooth, dust-free surfaces.

Key Features & Benefits

• Flame Retardant & Weather Resistant: Suitable for demanding building and services environments.
• Heat & Moisture Resistant: Designed for warm-side insulation joints, ducting and pipework.
• Clean Application: Backing paper enables accurate placement and fewer wrinkles.
• Reflective Foil Face: Helps reflect radiant heat and light at joints and seams.

Product & Technical Details

• Type: Aluminium foil joining & sealing tape (self-adhesive)
• Colour/Finish: Silver, reflective foil
• Size: 45 m length × 75 mm width
• Liner: Peel-off release paper
• Pack Size: 1 roll

Suitable Applications

• Joining foil-faced insulation boards and quilts
• Sealing HVAC ducting seams and end caps
• General sealing around pipes, vents and services

Instructions for Use

1. Ensure substrates are clean, dry and free from dust, oil and release agents.
2. Measure and cut the tape; peel a short section of the liner to start.
3. Apply with firm, even pressure from the centre outward; remove the liner progressively to avoid creases.
4. Overlap joints by at least 25 mm; press down with a roller or squeegee for best adhesion.

Limitations & Precautions

• Not a structural fixing; do not use where mechanical fastening is required.
• Adhesion may be reduced on damp, dusty, textured or low-energy plastics—test small areas first.
• Apply in dry conditions; avoid prolonged water immersion or direct flame contact.

Aluminium Foil Tape (45 m × 75 mm) delivers a clean, durable, reflective seal for insulation joints, ducting and pipework in building services and refurbishment projects.