Epoxy Bonding Sealer - Epoxy Primer & Sealer - Biokil CrownEpoxy Bonding Sealer

High-Performance Epoxy Primer and Sealer for Damp Substrates and Resin Coatings

Biokil Crown Epoxy Bonding Sealer is a two-component, solvent-free, low-viscosity epoxy primer designed to penetrate and consolidate porous or damp concrete and cementitious surfaces. Formulated to enhance adhesion for subsequent epoxy coatings, screeds, or tanking systems, it is ideal for use in basements, plant rooms, garages, and industrial environments. The product cures to form a tough, chemical-resistant surface and is suitable for use as a bonding agent before the application of resin-based waterproofing or flooring systems.

Key Features & Benefits

• Exceptional Adhesion: Provides a secure bond between the substrate and epoxy coatings or screeds.
• Penetrative Primer: Low-viscosity formulation penetrates into damp or porous concrete, sealing the surface.
• Solvent-Free: Low-odour and suitable for enclosed or sensitive environments.
• Chemical & Water Resistance: Once cured, forms a tough, impermeable surface resistant to moisture and common chemicals.
• Versatile Use: Suitable for walls and floors in both domestic and industrial settings.

Product Details

• Type: Two-part solvent-free epoxy sealer
• Components: Part A (resin) and Part B (hardener)
• Colour: Clear / Amber
• Coverage: Approx. 4–6 m²/kg depending on substrate porosity
• Pot Life: Approx. 30–40 minutes at 20°C
• Cure Time: Light traffic after 12–16 hours, full cure in 5–7 days
• Packaging: 5kg and 10kg kits
• SKU: BCEBS5 / BCEBS10

Application Instructions

1. Substrate Prep: Remove dust, grease, laitance, and loose material. Substrate can be damp but not wet or pooling.
2. Mixing: Add Part B (hardener) to Part A (resin) and mix thoroughly for 2–3 minutes using a slow-speed drill with paddle attachment.
3. Application: Apply by brush, roller, or squeegee. Work into the surface to ensure full penetration and even coverage.
4. Recoating: Apply subsequent epoxy coatings while the surface is still tacky or within recoat window as specified.

Limitations

• Do not apply onto standing water or in temperatures below +5°C.
• Must be overcoated with compatible resin finishes for floor traffic use.
• Ensure good ventilation in enclosed areas during application.

Health & Safety

Contains epoxy resins and amine hardeners – may cause skin and eye irritation. Wear suitable PPE including gloves, goggles, and respirator when handling. Refer to the product's Safety Data Sheet (SDS) before use.