Sikagard® Wood Preserver - ClearSikagard® Wood Preserver

Solvent-Free, Deep-Penetrating Protection for Timber

Sikagard® Wood Preserver Clear is a low-odour, solvent-free wood treatment designed to protect timber from wet rot, dry rot, decay, fungi, and wood-boring insects. Utilizing micro-fine active technology, it ensures deep penetration into the wood, providing long-lasting protection. Suitable for both interior and exterior use, it can be applied to damp timbers without compromising performance.

Key Features & Benefits

• Solvent-Free & Low Odour: Safe for indoor and outdoor applications.
• Deep Penetration: Micro-fine active technology ensures thorough protection.
• Fast Drying: Reduces downtime between application and overcoating.
• Non-Flammable: Enhances safety during application and storage.
• Versatile Application: Suitable for use on damp timbers.

Ideal For

• Interior and exterior rough-sawn or planed timber.
• Floorboards, joists, roof timbers, window frames, and doors.
• Pre-treatment before painting, staining, or varnishing.

Product Details

• Colour: Clear liquid.
• Packaging: 5-litre tin.
• Coverage: Approximately 3–4 m² per litre.
• Drying Time: Allow at least 2 hours between coats.
• Shelf Life: Use within 2 years of manufacture.
• Storage Conditions: Store between +5°C and +25°C in original containers.

Application Instructions

1. Surface Preparation: Ensure timber is clean and free from coatings.
2. Application: Shake well before use. Apply by brush, spray, or dipping. Apply a minimum of two coats, allowing at least 2 hours between coats.
3. End Grain Treatment: Pay special attention to end grains. Where possible, dip or flood these areas for a minimum of 3 minutes.
4. Overcoating: Allow to dry fully (typically 48 hours indoors) before applying paint, stain, or varnish.

Limitations

• Not suitable for surfaces in contact with food.
• Avoid contact with bitumen, roofing felt, or plastics.
• External timbers should be overcoated to reduce environmental impact.

Cleaning of Tools

Clean tools with water or appropriate solvent immediately after use.