Heavy Duty Floor Paint - Biokil Crown

Durable Solvent-Based Polyurethane Floor Coating for Industrial and Domestic Use

Biokil Crown Heavy Duty Floor Paint is a high-performance, solvent-based polyurethane floor coating designed for use on concrete and wooden floors in garages, factories, workshops, and other interior settings. Its semi-gloss finish provides a durable and long-lasting surface that is resistant to pedestrian foot traffic and light vehicular movement.

Key Features & Benefits

• High Durability: Resistant to pedestrian foot traffic and light rubber-wheeled vehicular traffic.
• Versatile Application: Suitable for concrete and wooden floors; can also be used on some asphalt floors (test application recommended).
• Easy Application: Ready to use; can be applied by brush or roller.
• Mid Sheen Finish: Provides an attractive semi-gloss appearance.
• Coverage: Approximately 12 m² per litre, depending on surface porosity.
• Quick Drying: Touch dry in 3 hours under normal conditions; recoatable after 16–24 hours.

Ideal For

• Garage floors
• Factory and workshop floors
• Interior walkways
• Wooden and concrete surfaces

Product Details

• Packaging: Available in 5 Litre and 20 Litre tins.
• Colours: Dark Grey, Light Grey, Red, Yellow, Blue
• Finish: Mid Sheen.
• Thinner: White Spirit.
• VOC Content: High (25–50%).

Application Instructions

1. Surface Preparation: Ensure surfaces are clean, dry, and free from loose or flaking materials. Remove oil, grease, and dirt using a heavy-duty degreasing agent. New concrete floors should be allowed to mature for several months before painting. Dense, smooth concrete surfaces may require acid etching to promote adhesion.
2. Priming: Porous surfaces may require a primer. Consult technical data for recommendations.
3. Application: Stir paint thoroughly before use. Apply two coats, allowing overnight drying between coats under normal conditions. The first coat may be thinned with up to 20% white spirit to assist drying.
4. Drying Time: Touch dry in 3 hours; recoatable after 16–24 hours.

Limitations

• Not suitable for use on floors that are likely to be continuously wet.
• Not recommended for use on asphalt floors without prior testing.
• Ensure adequate ventilation during application and drying.

Cleaning of Tools

Clean tools and equipment with white spirit immediately after use. Do not empty product into drains or watercourses.