{"product_id":"epoxy-tanking-waterproofing-system-for-concrete-and-masonry-biokil-crown","title":"Epoxy Tanking - Waterproofing System for Concrete and Masonry - Biokil Crown","description":"\n\u003ch3\u003eSolvent-Free, Two-Part Epoxy Waterproofing System for Concrete and Masonry\u003c\/h3\u003e\n\n\u003cp\u003e\n  Biokil Crown Epoxy Tanking is a high-performance, two-component, solvent-free epoxy coating formulated to provide a durable, chemical- and water-resistant barrier to internal concrete and masonry surfaces. Suitable for tanking basements, retaining walls, inspection pits, and plant rooms, it cures to form a tough, impermeable membrane that resists both moisture ingress and negative hydrostatic pressure. It also serves as a protective coating in areas subject to high humidity or chemical exposure.\n\u003c\/p\u003e\n\n\u003ch4\u003eKey Features \u0026amp; Benefits\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWater \u0026amp; Vapour Barrier:\u003c\/strong\u003e Provides long-lasting protection against water ingress, damp, and vapour transmission.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolvent-Free Formula:\u003c\/strong\u003e Low odour and safe for use in confined or sensitive environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChemical Resistance:\u003c\/strong\u003e Resistant to a wide range of mild acids, alkalis, and cleaning chemicals.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNegative \u0026amp; Positive Pressure:\u003c\/strong\u003e Suitable for areas exposed to water pressure from either side of the structure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to Apply:\u003c\/strong\u003e Can be applied by roller, brush, or airless spray in two coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eProduct Details\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Two-component solvent-free epoxy resin system\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComponents:\u003c\/strong\u003e Part A (resin) and Part B (hardener)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Grey (other colours available upon request)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approx. 3–4 m²\/kg for two coats, depending on substrate porosity\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot Life:\u003c\/strong\u003e Approx. 40 minutes at 20°C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Cure:\u003c\/strong\u003e 5–7 days\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Typically supplied in 5kg or 10kg kits\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e BCEPXTANK5 \/ BCEPXTANK10\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eApplication Instructions\u003c\/h4\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e Surfaces must be sound, clean, and free from dust, oil, or contaminants. Slightly damp substrates are acceptable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e Add Part B (hardener) to Part A (resin) and mix thoroughly with a slow-speed drill and paddle mixer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFirst Coat:\u003c\/strong\u003e Apply evenly using a brush or roller. Allow to cure for 12–18 hours depending on conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecond Coat:\u003c\/strong\u003e Apply perpendicular to the first. Ensure full coverage and membrane thickness.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e Avoid water exposure during curing. Can be overlaid with screeds, renders, or tile finishes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch4\u003eLimitations\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not apply at temperatures below +5°C or in damp, unventilated conditions during curing.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for external UV-exposed surfaces unless overcoated with a protective finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eHealth \u0026amp; Safety\u003c\/h4\u003e\n\u003cp\u003e\n  Contains epoxy resins and hardeners — may cause allergic reactions or skin irritation. Always wear gloves, goggles, and respiratory protection. Refer to the product’s Safety Data Sheet (SDS) before use.\n\u003c\/p\u003e","brand":"DIY Refurb","offers":[{"title":"Grey \/ 5kg","offer_id":53341478420818,"sku":"161","price":138.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1060\/4006\/6386\/files\/Epoxy-Tanking-AB-Pic.webp?v=1777965715","url":"https:\/\/glazingsuppliesdirect.com\/products\/epoxy-tanking-waterproofing-system-for-concrete-and-masonry-biokil-crown","provider":"Glazing Supplies Direct","version":"1.0","type":"link"}